AsyncLabs Black Widow 1.0


AsyncLabs Black Widow 1.0

The AsyncLabs Black Widow 1.0 is an Arduino Duemilanove clone with 802.11b wireless onboard. The USB-B connector has been replaced by a USB-mini-B connector (on the other end of the board!) and the WiFi module has taken it's place. The power supply connector is also changed to a 2-pin JST connector to save space.

802.11b has a maximum speed of 11Mbps, but because of overhead, maximum TCP throughput is around 5.9Mbps. This is not fast for WiFi, but is much faster than you can expect to maintain with an ATmega328.

AsyncLabs Black Widow 1.0
MCU ATmega328
DigitalPins 14
Analog Inputs 6
Analog Outputs 0
Operating Voltage 5
Operating Frequency 16MHz
3.3V Output 50mA
Test Current Draw
Web Site AsyncLabs
  1. Information from manufacturers and other sources.
  2. Test current from sketch that exercises I2C, SPI, and analog pins.
Arduino Board Logo


Arduino-Board is the go-to source for information on many available Arduino and Arduino-like boards, tutorials and projects.

Help and Support


Stay updated

Sign up if you would like to receive our once monthly newsletter.