DFRduino Pro Mini V1.3

DFRduino Pro Mini V1.3

The DFRobot DFRduino Pro Mini is a clone of the Arduino Pro Mini, with 8 ananlog inputs, as compared to 6 analog inputs on the official Arduino Pro Mini. It has a surface mount ATmega328, and is intended for permanent embedding in projects. There are no installed headers, so wires may be soldered directly to the board. With no USB, it must be programmed using the FTDI USB to serial TTL cable or equivalent.

There is also a 3.3V, 8MHz version of the board.

DFRduino Pro Mini V1.3
ParameterValue
MCU ATmega328
DigitalPins 14
PWM 6
Analog Inputs 8
Analog Outputs 0
Operating Voltage 3.3 / 5
Operating Frequency 8MHz
3.3V Output Unspecified
Test Current Draw
Web Site DFRobot
Notes
  1. Information from manufacturers and other sources.
  2. Test current from sketch that exercises I2C, SPI, and analog pins.
Arduino Board Logo

 

Arduino-Board is the go-to source for information on many available Arduino and Arduino-like boards, tutorials and projects.

Help and Support

Arduino-Board

Stay updated

Sign up if you would like to receive our once monthly newsletter.