Evil Mad Scientist Labs Diavolino

Evil Mad Scientist Labs Diavolino

The Diavolino is a Arduino Pro-like board, in that it is stripped completely down to the lowest possible parts count. There isn't even a power supply connector! This thing is intended to be the bare minimum. It also is about the craziest looking Arduino clone out there. The standard 6 and 8-pin connectors are an extra cost option.

With no voltage regulator included (there is a place for a TO-92 size regulator) you will need to supply the correct voltage to the board. That voltage is the determining factor for the MCU's maximum frequency. It needs to be 4.5 to 5.5VDC for the supplied 16MHz crystal. Here is a ATmega328 clock frequency calculator to help decide the voltage and frequency.

Evil Mad Scientist Labs Diavolino
ParameterValue
MCU ATmega328
DigitalPins 14
PWM 6
Analog Inputs 6
Analog Outputs 0
Operating Voltage 5
Operating Frequency 16MHz
3.3V Output None
Test Current Draw
Web Site Evil Mad Scientist Labs
Notes
  1. Information from manufacturers and other sources.
  2. Test current from sketch that exercises I2C, SPI, and analog pins.
Arduino Board Logo

 

Arduino-Board is the go-to source for information on many available Arduino and Arduino-like boards, tutorials and projects.

Help and Support

Arduino-Board

Stay updated

Sign up if you would like to receive our once monthly newsletter.