Sparkfun Photon Redboard

Sparkfun Photon Redboard

The Sparkfun Electronics Photon Redboard is a Wi/Fi enabled, 120MHz ARM Cortex M3 powered monster in an Arduino Uno R3 footprint. It has some of the familiar Uno I/O pins, but only 8 digital I/O. There is one DAC output. It runs off of USB or a 6V to 15V wall wart. It is a 3.3V device, so all shields must be 3.3V compatible, and not connect to D8 and D9. The Wi/Fi is capable of up to 65Mbps and has WEP, WAPI, WPA and WPA2-PSK WiFi security modes.

With 1MB flash and 128kB RAM, it is a very useful base for an IoT device.

Sparkfun Photon Redboard
ParameterValue
MCU Photon P1
DigitalPins 0
PWM 0
Analog Inputs 6
Analog Outputs 1
Operating Voltage 3.3
Operating Frequency 120MHz
3.3V Output None
Test Current Draw
Web Site Sparkfun Electronics
Notes
  1. Information from manufacturers and other sources.
  2. Test current from sketch that exercises I2C, SPI, and analog pins.
Arduino Board Logo

 

Arduino-Board is the go-to source for information on many available Arduino and Arduino-like boards, tutorials and projects.

Help and Support

Arduino-Board

Stay updated

Sign up if you would like to receive our once monthly newsletter.